A STUART BEAM ENGINE BOUGHT ONLINE - PART #6

A Stuart Beam Engine Bought Online - Part #6. Removing the Steam Chest to seal the leaking Gaskets and check the Slide Valve. The timing was way out so I set the Slide Valve in the correct position on the Valve Rod. But the Slide Valve was machined incorrectly so I machined it to the correct dimension. After doing this I then reassembled the Cylinder to test the result. I drilled a detent in the valve gear cross shaft to locate a new Grub Screw tightly. Later I drilled another two detents and changed the others also. Finally I removed the Cylinder to refit the base and fix yet another leak. https://www.patreon.com/keithappleton IF YOU ENJOY WATCHING THESE DETAILED TUTORIAL VIDEOS THAT I PRODUCE TO HELP BEGINNERS TO THE HOBBY, THEN PLEASE BECOME A PATRON OF MY YOUTUBE CHANNEL VIA "PATREON" AND ALLOW ME THE TIME TO MAKE EVEN MORE OF THESE SPECIALIST AND HIGHLY DETAILED TUTORIAL VIDEOS. AS A PATREON SUPPORTER YOU ARE ABLE TO ACCESS MANY OF MY VIDEOS THAT ARE NOT FOR PUBLIC VIEW ON YOUTUBE. PLEASE VISIT MY WEBSITE FOR THE VERY EASY TO USE COMPREHENSIVE PLAYLIST INDEX OF ALL OF MY YOUTUBE VIDEOS: www.mainsteam.co.uk OR CLICK HERE FOR PATREON: https://www.patreon.com/keithappleton Please become a member of my Youtube Channel to get access to extra videos: https://www.youtube.com/channel/UCgeQiJg-PIH5MZQn0aRd1mg/join