How to replace the Struts 2004 - 2008 Ford F-150 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/F150Gen11 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Strut: https://carparts.solutions/Struts_F150Gen11 - Penetrating oil: https://carparts.solutions/PenetratingOil - Silicone grease 💪 TIGHTENING TORQUES - Outer tie rod holding nut: 85 Ft-lbs - Strut foot nut: 351 Ft-lbs - Nuts holding the strut mount bearing: 35 Ft-lbs - Wheel lug nuts: 150 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Ford F-150: https://carparts.solutions/ToolBox List of the tools we used to replace the Struts on a Ford F-150 11: - Hydraulic jack: https://carparts.solutions/FloorJack - Jack stands: https://carparts.solutions/JackStands - 19 mm wrench - 27 mm wrench - Crowbar - Wheel lug wrench - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Ratchet - 15 mm socket - 30 mm socket - Lineman's pliers - Hammer - Wire brush - Mallet - Extender - Pin punch Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2004 Ford F-150 - 2005 Ford F-150 - 2006 Ford F-150 - 2007 Ford F-150 - 2008 Ford F-150 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your 2004 - 2008 F-150 safely? ⬆ 🚗 : https://youtu.be/i9SNtH0CyoY ⚠️ CARPARTS.COM'S INFOS -During this operation, you will be intervening on the front axle of your car, so it is advisable to perform a wheel alignment afterwards. -The components to be removed are very often seized up, so don't hesitate to brush and to use penetrating oil to make removal easier. -We advise never replacing just one strut, to make sure you drive we the most balanced vehicle possible. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro + how to pull up your F-150 0:20 Remove the outer tie rod 0:48 Remove the strut base bolt 1:21 Remove the upper retaining nuts 1:52 Remove the strut 2:07 Prepare the installation 2:20 Put the strut back 3:01 Put the base bolt back 3:15 Put the outer tie rod back in + tightening torque 3:41 Screw the strut base bolt back + tightening torque 4:06 Put your F-150 back on the ground 4:15 Screw the upper retaining nuts back + tightening torque