How to replace the Rear Wheel Hub Assembly 2006 - 2012 Ford Fusion 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/FUSION Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Multi-purpose grease - Penetrating oil: https://carparts.solutions/PenetratingOil - Silicone grease - Wheel hub: https://carparts.solutions/RearWheelHub_FUSION - Brake cleaner: https://carparts.solutions/BrakeCleaner - Copper grease 💪 TIGHTENING TORQUES - Wheel hub nut: 189 Ft-lbs - ABS sensor holding bolt: 80 In-lbs - Brake caliper mount bolts: 52 Ft-lbs - Slide pin bolts: 19 Ft-lbs - Disc holding bolt: 10 Ft-lbs - Wheel lug nuts 2006 through 2010 models : 98 Ft-lbs - Wheel lug nuts 2011 through 2012 models : 100 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Ford Fusion: https://carparts.solutions/ToolBox List of the tools we used to replace the Rear Wheel Hub Assembly on a Ford Fusion: - Hydraulic jack: https://carparts.solutions/FloorJack - Jack stands: https://carparts.solutions/JackStands - 13 mm wrench - 14 mm wrench - 17 mm wrench - Brake wind-back Tool: https://carparts.solutions/BrakePistonTool - Chisel - Crowbar - Long 13 mm socket - Cylindrical brush - Wheel lug wrench - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Ratchet - Flat head screwdriver - 36 mm socket - 8 mm socket - Torx T40 socket - Lineman's pliers - Hammer - Paper towels - Extender - Pin punch Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2006 Ford Fusion - 2007 Ford Fusion - 2008 Ford Fusion - 2009 Ford Fusion - 2010 Ford Fusion - 2011 Ford Fusion - 2012 Ford Fusion 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your 2006 - 2012 Fusion safely? ⬆ 🚗 : https://youtu.be/IumroE-E1qc - How to replace the Rear Brake Calipers 2006 - 2012 Ford Fusion 🚗 : https://youtu.be/0SAzVQT9-k0 ⚠️ CARPARTS.COM'S INFOS - We recommend replacing the hub nut with a new one. - Once the wheel hub assembly has been removed, thoroughly clean the location of the hub assembly in the wheel knuckle thoroughly using a wire brush and brake cleaner. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro + how to jack your Fusion 0:19 Loosen the wheel hub nut 0:37 Remove the brake system 2:58 Remove the ABS sensor 3:24 Remove the wheel hub 3:39 Clean 3:51 Put the wheel hub back + tightening torque 4:27 Put the brake system back + tightening torques 8:50 Put your Fusion on the ground 9:07 Tips