No More Prefab 90's with THIS! 🫨 🫨

Lightweight, portable 90 degree PVC bending template The Bender’s friend is an easy to use template for bending perfect 90’s in your PVC. To be paired with a heat source, the Bender’s Friend will allow you to make kink-free bends every time. Works with 3 sizes 1/2″, 3/4″ and 1″. How to use: Start by measuring the distance where you need to run your pipe. Subtract for the elbow based on the info below. Make a mark on the pipe at that point. That is where your elbow will begins. Heat the pipe with the heating method you have on hand and lay it in the appropriate groove. The distance required for a 1/2″ elbow is 5 inches. The distance required for a 3/4″ elbow is 6.5 inches. The distance required for a 1″ elbow is 8 inches. Handles 3 sizes: 1/2″, 3/4″ and 1″ No more kinks Reduce your PVC inventory Does compound bends Perfect match for any PVC heater 𝙁𝙤𝙡𝙡𝙤𝙬 𝙍𝙖𝙘𝙠-𝘼-𝙏𝙞𝙚𝙧𝙨 𝙤𝙣: 𝙄𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢: 𝙝𝙩𝙩𝙥𝙨://𝙬𝙬𝙬.𝙞𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢.𝙘𝙤𝙢/𝙧𝙖𝙘𝙠𝙖𝙩𝙞𝙚𝙧𝙨𝙩𝙤𝙤𝙡𝙨/ 𝙏𝙞𝙠𝙩𝙤𝙠: 𝙝𝙩𝙩𝙥𝙨://𝙬𝙬𝙬.𝙩𝙞𝙠𝙩𝙤𝙠.𝙘𝙤𝙢/@𝙧𝙖𝙘𝙠𝙖𝙩𝙞𝙚𝙧𝙨𝙩𝙤𝙤𝙡𝙨 𝙁𝙖𝙘𝙚𝙗𝙤𝙤𝙠: 𝙝𝙩𝙩𝙥𝙨://𝙬𝙬𝙬.𝙛𝙖𝙘𝙚𝙗𝙤𝙤𝙠.𝙘𝙤𝙢/𝙍𝙖𝙘𝙠𝘼𝙏𝙞𝙚𝙧𝙨 𝙐𝙎 𝙎𝙄𝙏𝙀: 𝙝𝙩𝙩𝙥𝙨://𝙧𝙖𝙘𝙠-𝙖-𝙩𝙞𝙚𝙧𝙨.𝙘𝙤𝙢/ 𝘾𝘼𝙉𝘼𝘿𝘼 𝙎𝙄𝙏𝙀: 𝙝𝙩𝙩𝙥𝙨://𝙧𝙖𝙘𝙠-𝙖-𝙩𝙞𝙚𝙧𝙨.𝙘𝙖/ Big Ups to @BB_Sparky for the demo!