How to replace the Rear Axle Bearing and Seals 2014 - 2019 Chevrolet Silverado 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/SILVERADO Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Differential fluid: https://carparts.solutions/DifferentialFluid_SILVERADO - Multi-purpose grease - Penetrating oil: https://carparts.solutions/PenetratingOil - Rear axle bearing: https://carparts.solutions/RearAxleBearing_SILVERADO - Rear axle seal: https://carparts.solutions/RearAxleSeal_SILVERADO - Brake cleaner: https://carparts.solutions/BrakeCleaner 💪 TIGHTENING TORQUES - Pinion shaft lock bolt : 27 Ft-lbs - Differential cover bolts: 30 Ft-lbs - Differential’s filler cap: 24 Ft-lbs - ABS sensor holding bolt: 156 In-lbs - Brake caliper mount bolts: 170 Ft-lbs - Slide pin: 38 Ft-lbs - Wheel lug nuts: 140 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Chevrolet Silverado: https://carparts.solutions/ToolBox List of the tools we used to replace the Rear Axle Bearing and Seals on a Chevrolet Silverado: - Hydraulic jack: https://carparts.solutions/FloorJack - Jack stands: https://carparts.solutions/JackStands - 10 mm wrench - Bearing removal tool - Fork - Magnetic extender - Slide hammer - Sledgehammer - Wheel lug wrench - Bearing installation tool - Heat gun - Milling cutter - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Ratchet - Flat head screwdriver - Torx T15 screwdriver - 10 mm socket - Torx T30 socket - Lineman's pliers - Fluid container - Hammer - 3/8" drive extension socket - Cloth - Paper towels - Sandpaper - Oil syringe - Vacuum Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2014 Chevrolet Silverado - 2015 Chevrolet Silverado - 2016 Chevrolet Silverado - 2017 Chevrolet Silverado - 2018 Chevrolet Silverado - 2019 Chevrolet Silverado 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your 2014 - 2019 Chevrolet Silverado safely? ⬆ 🚗 : https://youtu.be/sjDSV8zXPwI - How to replace the Rear Brakes 2014 - 2019 Chevrolet Silverado 🚗 : https://youtu.be/b5yew7MSMJM ⚠️ CARPARTS.COM'S INFOS - In order to remove the rear axle shaft, you need to disengage it from the differential. - Before replacing the differential cover, you need to clean the seal surface to ensure a perfect seal. - Before fitting the rear axle bearing back on, you must clean the seal surface to ensure it is completely impermeable. - Attention! The bearing must be inserted properly. Ensure that you are inserting the side of the bearing that is more rounded on the differential side. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0.00 Intro + how to jack your Silverado 0.19 Remove the rear brake system 0.26 Remove the axle shaft 3:30 Remove the rear axle seal 0.04 Remove the rear axle bearing 4:38 Clean the seal surface 4:58 Put the rear axle bearing back 5:32 Put the rear axle seal back 5:52 Put the axle shaft and differential cover back + tightening torques 8:52 Put the rear brake system back 9:37 Add differential fluid back + tightening torques