HEAVY STRUGGLE: Loading Dead Komatsu with Broken Cables!

Experience the ultimate Industrial ASMR! 🚜💨 In today's heavy-work challenge, we head into a tight, forgotten garage where four Komatsu PC200 Excavators have been parked under trees for years. Nature has started taking over, covering these 20-ton machines in a thick, velvety blanket of emerald green moss. Three of these legendary machines are broken—engines seized and parts missing. But they’ve been sold, and the new owner has a plan: a complete repair and a second life. Watch the intense and challenging loading process as they use a working Komatsu PC200-8 to pull and push its "dead" PC200 onto Black Mitsubishi Fuso Self-Loader Trucks. What you will hear & see: 🔊 Raw Engine ASMR: The deep humming and rough running of the PC200. 🛠️ Mechanical Struggle: Wire ropes snapping, sling belts breaking, and high-pressure hydraulic oil leaks! ⚠️ Tight Maneuvers: Precision operating in a very cramped space where every inch counts. 💥 Heavy Metal Impact: The "Bang" of the bucket teeth meeting the steel body during the final push. This is a story of strategy, power, and coordination. Will we get these mossy giants onto the trucks without more equipment failure? 🕒 TIMESTAMPS: 00:08 - Loading Dead Komatsu PC200 Preview 00:54 - Abandoned Excavators Covered in Moss 01:25 - Sold! New Owner Plans a Total Repair 01:52 - Challenging Load: 20-Ton Broken Unit 02:22 - Using Winch and Wire Rope Strategy 02:50 - High Stakes Coordination & Strategy 03:19 - Tight Space Maneuver: Engine Humming 03:48 - Attaching Wire Rope to Dead PC200 04:13 - Disaster! The Bucket Wire Rope Breaks 04:38 - Setting Heavy Lifting Sling Belts 05:12 - Dual Power: Winch & Excavator Lift 06:02 - Progress! Climbing the Truck Ramps 06:33 - High Tension: The Sling Belt Snaps 06:48 - Hydraulic Rod & Oil Leak Spray 07:21 - Switching to Heavy Duty Chains 08:04 - Struggling to Move the Dead Machine 08:56 - Accident! Bucket Teeth Hit the Cab 09:26 - Precise Pushing on the Left Track 09:54 - Engine Power: Pushing Both Tracks 10:34 - Final Alignment to the Truck Bed 11:16 - Halfway Loaded: The Arm is Stuck 11:40 - Pushing the Broken Arm Forward 12:05 - Engine Trouble: Manual Fuel Priming 12:28 - Back to Work: Pushing the Tracks 12:48 - Engine Stress & Heavy Black Smoke 13:23 - Close Call! Bucket Hits the Cab again 13:53 - Success! Entire Unit on the Truck 14:13 - Lowering the Hydraulic Truck Jacks 14:30 - Careful Alignment on the Metal Bed 15:00 - Combining Winch Power & Pushing 15:25 - Final Loading onto the Self Loader 16:41 - Lifting the Arm for the Final Push 17:25 - Tight Maneuvers in the Garage 18:11 - Perfect Loading! Final Body Impacts 18:44 - Folding Ramps & Transport Safety 19:24 - Black Fuso Truck Tight Maneuvering 20:34 - Blue Fuso Reverse Exit Maneuver 🌍 CONNECT WITH US: If you enjoy the raw sounds of heavy machinery and construction projects, don't forget to: ✅ SUBSCRIBE for more Industrial ASMR. 🔔 HIT THE BELL to never miss a heavy load challenge! 💬 COMMENT below: Have you ever seen a machine this mossy run again? #Excavator #Komatsu #HeavyMachinery #IndustrialASMR #Construction #FusoTruck #Abandoned #Restoration #MrZygy3 #HeavyEquipment #MachineryLoading ------------------------------------------------------------------------- 🌍 CONNECT WITH US ------------------------------------------------------------------------- 📸 Instagram: [https://www.instagram.com/mrzygy3] 📘 Facebook: [https://www.facebook.com/MrZygy3] 🎵 TikTok: [https://www.tiktok.com/@mrzygy3id] ------------------------------------------------------------------------- ⚠️ COPYRIGHT & SAFETY NOTICE All footage is original and filmed by the MrZygy3 crew. Unauthorized use or re-upload of this content is prohibited. Always follow local safety regulations (OSHA/K3) when working around heavy machinery.