How to replace the Front ABS Sensor 2004 - 2008 Ford F-150 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/F150Gen11 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Penetrating oil: https://carparts.solutions/PenetratingOil - ABS sensor: https://carparts.solutions/FrontABSSensor_F150Gen11 💪 TIGHTENING TORQUES - ABS sensor holding bolt: 6 Ft-lbs - Brake caliper mount bolts: 148 Ft-lbs - Wheel lug nuts: 150 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Ford f-150: https://carparts.solutions/ToolBox List of the tools we used to replace the Front ABS Sensor on a Ford F-150: - Hydraulic jack: https://carparts.solutions/FloorJack - Jack stands: https://carparts.solutions/JackStands - Fork - Wheel lug wrench - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Ratchet - Flat head screwdriver - 18 mm socket - 5mm Allen socket - Hammer - Wire brush - Clamp or iron wire - Paper towels - Extender Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2004 Ford f-150 - 2005 Ford f-150 - 2006 Ford f-150 - 2007 Ford f-150 - 2008 Ford f-150 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your 2004 - 2008 F-150 safely? ⬆ 🚗 : https://youtu.be/i9SNtH0CyoY ⚠️ CARPARTS.COM'S INFOS - Before installing the new sensor, we recommend that you thoroughly clean its location using fine sandpaper. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro + how to pull up your F-150 0:16 Disconnect the electric connector + remove the cable from its housings 1:03 Remove the brake system 1:48 Remove the ABS sensor from the wheel knuckle 2:42 Install the ABS sensor + tightening torque 3:18 Put the brake system back on + tightening torque 4:01 Put the cable back in its housings 4:18 Reconnect the ABS sensor connector 4:35 Put your F-150 on the ground