3 Plate Mold: Mobile Phone Protective Case Mold Design.

More injection mold case: https://www.spark-mould.com/mould-case.html The characteristic of the three-plate mold is that when the mold is opened, the cold slag of the gate has been separated from the product. The structure is to add a sliding plate to the fix mold for the gate material to detachment. The commonly used three plate mold has three parts: the first time is between the stripping plate and the fix mold; the second time is between the stripping plate and the upper fixed plate; the third time is between the Movable mold and the fix mold. The mobile phone case is made of TPU. There is an upside down buckle around the product, but the buckle is not deep. The production cannot be automated, and the products need to be picked up manually. The appearance requirements of mobile phone protective cases are strict. The gate cannot be set on the surface of the product, but should be set at the camera hole. The feeding method is from small runner to large runner, and the gate type is side gate. #phonecase #injectionmold #molddesign #mechanism #simulation