How to replace the Outer Tie Rod 2004 - 2008 Ford F-150 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/F150Gen11 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Outer tie rod: https://carparts.solutions/OuterTieRod_F150Gen11 - Penetrating oil: https://carparts.solutions/PenetratingOil - Silicone grease 💪 TIGHTENING TORQUES - Outer tie rod holding nut: 85 Ft-lbs - Locknut: 76 Ft-lbs - Wheel lug nuts: 150 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Ford F-150: https://carparts.solutions/ToolBox List of the tools we used to replace the Outer Tie Rod on a Ford F-150: - Hydraulic jack: https://carparts.solutions/FloorJack - Jack stands: https://carparts.solutions/JackStands - 15 mm wrench - 19 mm wrench - 24 mm wrench - Ball joint puller - Caliper - Marker - Wheel lug wrench - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Small ratchet - 7 mm socket - Lineman's pliers - Hammer - Wire brush - Extender Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2004 Ford F-150 - 2005 Ford F-150 - 2006 Ford F-150 - 2007 Ford F-150 - 2008 Ford F-150 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your 2004 - 2008 F-150 safely? ⬆ 🚗 : https://youtu.be/i9SNtH0CyoY ⚠️ CARPARTS.COM'S INFOS - During this operation, you will work on the steering system of your vehicle. A professional alignment check should be performed to ensure that your steering system is once again perfectly adjusted and functioning. - The components to be removed are very often seized up, so don't hesitate to brush and to use penetrating oil to make removal easier. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro + how to pull up your F-150 0:19 Loosen the locknut 0:52 Remove the outer tie rod from the steering knuckle 1:20 Remove the outer tie rod 1:35 Change the locknut 2:10 Replace the outer tie rod + tightening torque 3:30 Tighten the locknut 3:55 Put your F-150 back on the ground