How to Install Prado Unifit Outlets Flush in Wood or Stone | Hidden Modern Outlet Installation Guide

Looking to achieve that seamless, modern look with flush-mounted outlets? In this video, we’ll show you exactly how to install Prado Unifit outlets so they sit completely flush — first in wood panels or cabinetry, and then in stone surfaces like backsplashes or countertops. Whether you’re a DIYer, designer, or professional installer, this guide walks you through every detail — from drilling measurements and recess depths, to the tools and bits you’ll need for a perfect installation every time. We’ll start with a veneered wood panel installation, using: • 1 ½” Forstner bit for the face plate recess (about 2.5 mm deep) • 1 ⅜” Forstner bit for the UniFit body • Step-by-step alignment tips for a clean, centered finish Then, we’ll move on to stone installation, covering: • The correct diamond hole saw sizes for each step • How to use a drill guide with water cooling for precision • Fine-tuning with a diamond chamfer cone to get the perfect flush fit Finally, we’ll show how easy it is to swap out Prado Unifit faceplates in any color or finish — no tools required. And if you prefer a surface-mounted look, Prado’s interchangeable trim rings offer even more design flexibility. ⸻ ⚙️ What You’ll Learn ✅ How to recess Prado Unifit outlets flush in wood and stone ✅ Recommended tools, bits, and drilling depths ✅ How to align and secure UniFit bodies perfectly ✅ Tips for faceplate swaps and trim ring customization ⸻ 🔗 Shop the Products Featured 👉 Prado Unifit Outlets: https://prado.com/ca/product/unifit-outlet/ 👉 Prado Interchangeable Faceplates: https://prado.com/ca/products/cover-plate/ 👉 Prado Trim Rings: https://prado.com/ca/products/small-trim-ring-color-set/