Geissele Brownells Exclusive Triggers

In this video, Caleb covers the Brownells exclusive Geissele AR-15 triggers and explains why these are some of the most affordable Geissele triggers available. You will see the two Brownells exclusive variants side by side, learn the real difference between single stage and two-stage triggers, and watch a full trigger install using a cutaway lower receiver so you can see exactly what is happening inside the fire control group. Caleb breaks down the Brownells Geissele Competition (BGC) single stage and the Brownells Geissele Enhanced two-stage, then explains the cost-saving design change that makes these exclusives cheaper without turning them into a budget trigger. He also walks through removal of a mil-spec trigger, use of the included match pins, grease points, hammer pin retention clips, and a full AR-15 function check after installation. Chapters 00:08 Overview: Brownells exclusive Geissele AR-15 triggers 00:29 Why these are the most affordable Geissele triggers 00:46 BGC single stage vs Brownells Geissele Enhanced two-stage 01:21 Single stage vs two-stage: choose what you shoot best 01:41 Using a cutaway lower to show trigger function and install 02:06 What a mil-spec single stage trigger looks like in motion 02:56 Install the two-stage trigger first for comparison 03:20 What is different on these Brownells exclusive triggers 03:52 Remove the mil-spec hammer pin first 04:24 Hammer comparison: standard Geissele retention vs Brownells exclusive 05:21 How the external retaining clip holds the hammer pin 05:54 Why the trigger pin stays put on a mil-spec setup 06:44 Removing the trigger pin and why the selector can block removal 07:16 Remove the grip to pull the selector (detent and spring warning) 08:20 Fire control group is out and ready for install 08:45 Grease points and why lubrication matters 09:30 Trigger install steps and aligning the disconnector 10:53 Trigger installed and basic check before hammer install 11:04 Hammer differences and the retaining clip orientation 12:11 Installing the retaining clip correctly 13:27 Grease points on the hammer contact surfaces 13:51 Installing the hammer and spring legs on the trigger pin 14:10 Insert the hammer pin from the opposite side of the clip 15:05 Seating the pin past the clip and tool leverage tips 15:34 Reinstall the selector and grip 16:24 Full AR-15 trigger function check (safe, fire, reset) 16:50 What a two-stage trigger feels like mechanically 17:44 Single stage explanation and wrap-up Parts and items referenced Brownells exclusive Geissele triggers (BGC single stage, Enhanced two-stage) Cutaway AR-15 lower receiver (for viewing the mechanism) Mil-spec AR trigger (removed) Geissele match pins (use the included pins) Hammer pin retaining clips (Brownells exclusive design) Brownells Action Lube Plus Punch set and screwdriver for grip removal