The Dusty Lumber Co Videos

1:51

Fun morning wheeling with the @RockJock4x4byJohnCurrie and @CurrieEnt crews

18.2K

722

37

1 week ago

1:09

First time really testing out the @nacho_offroadlighting for night wheeling! @northridgenation

11.1K

636

28

1 week ago

0:52

Putting the @ArtecIndustries armour to the test! Bumpers and skid plates doing their jobs perfectly!

11.1K

456

32

1 week ago

2:33

Day 1 giving JT1 a good shakedown testing for clearance, armour strength and smile generation

21.8K

988

85

1 week ago

2:26

Before hitting the first trail we set up the @apexdesignsusa 4 tire inflate/deflate system

71.1K

1.6K

72

1 week ago

0:46

Made it to Moab for the first time at ESJ! Getting unloaded off the @s@southlandtrailersnd ready!

19.5K

619

11

1 week ago

0:26

Had an extra spot on the @southlandtrailers so took one of the @northridgenation Jeeps as well 👍

32.1K

674

31

1 week ago

1:30

If you tow trailers it’s definitely worth checking out the @TimbrenIndustries kits

22.2K

706

14

1 week ago

0:30

Last step at @northridgenation before we load up and head out is to get all the stickers on!

28K

653

26

1 week ago

1:16

Next step at @northridgenation is to install the @RCVUltimateAxles RCV’s on the front!

36.6K

992

16

1 week ago

3:00

First step in the axle rebuild at @northridgenation is new @revolutiongearaxle components

182.4K

1.9K

33

1 week ago

1:42

Drove to @northridgenation to get the gears and axle shafts upgraded. First step tear down!

49K

1.1K

34

1 week ago

0:27

First stop after a 14 hr drive is @northridgenation for some upgrades before Moab!

37.6K

751

16

1 week ago

1:15

Hooked onto the @southlandtrailers gooseneck, loaded up the JT and headed out!

187.1K

2.1K

68

1 week ago

0:35

Loading up the @Decked with supplies before heading out to Washington and then Moab!

120.1K

1.6K

53

1 week ago

0:52

Fun new project just showed up from @DemonPowersports @segwaypowersportscan

365K

2.2K

64

1 week ago

2:56

Getting the @Decked drawer system installed on JT1 before heading to Easter Jeep Safari

2.5M

18K

144

2 weeks ago

0:14

Whether it’s woodwork or metalwork work, getting things lined up and fitting right is rewarding

78.1K

748

14

1 month ago

0:52

Getting the table skirt and legs glued together with @Titebond and @BoraTool clamps and sawhorses 👍

59.8K

1.2K

35

1 month ago

1:52

Getting the @RockJock4x4byJohnCurrie Johnny joints in place to measure for control arm lengths

24.3K

768

18

1 month ago

0:14

One last test fit before gluing these table base pieces together

37.1K

900

27

1 month ago

1:31

Getting the @CurrieEnt axles lifted into place with the @MilwaukeeTool chain hoist

40.2K

1.2K

46

1 month ago

3:01

@festool-canada has developed a new version of the DOMINO DF 500 with some great new upgrades!

21.2K

648

31

1 month ago

2:12

Getting the aluminum @Motobilt_inc bobbed bed assembled and set in place

25.7K

938

27

1 month ago

0:55

Getting the @CurrieEnt Extreme 60 axles out of the crates and rolled into place!

22.9K

643

21

1 month ago

2:24

Getting the table skirt and bottom side of the table ready for finish with @festool-canada

31.6K

975

21

1 month ago

0:47

Time to glue up the all the table base pieces with @T@Titebond dark and @Bor@BoraToolmps!

19.9K

754

15

1 month ago

2:24

Getting the @Motobilt_inc back half kit set up and welded in place

41.1K

1.1K

29

1 month ago

0:47

Getting the table base foot pads glued up with @Titebonddark and clamped with @BoraTool clamps

118.8K

1.4K

21

1 month ago

2:02

Getting @Motobilt_inc bobbed JT bed all painted and ready to go! @dickindustriesinc

10.9K

485

10

1 month ago

2:40

Getting the @Motobilt_inc back half kit set in place for a test fit 👍

23.2K

832

35

1 month ago

1:06

Hooked on to the @southlandtrailers tilt deck to haul my wifes SUV to the dealership for diagnosing

21.2K

578

8

1 month ago

2:49

Fun 3D @WoodTrick puzzle build with my two youngest kids 👍

28.5K

1.2K

37

1 month ago

1:16

These new @festool-canada Granat PROfile pads are amazing! Getting the table base pieces sanded 👍

19.6K

832

14

1 month ago

13:08

Building a timber frame workbench

9.1K

560

66

1 month ago

2:14

Getting the final pieces cut off the Gladiator and now we can start the building phase!

14.1K

538

33

1 month ago

0:37

Double checking cut before cutting off the rear but @dickindustriesinc cut lines are dead on!

17.4K

600

23

1 month ago

1:38

Bob Hamilton and his cool old Willys came to pick up Jeep parts to put on the Willys!

19.5K

695

18

1 month ago

2:33

Untitled video

14.8K

600

8

1 month ago

0:57

Picked up a @hypertherm plasma cutter from @bluecollarsuperstore 👍 Much quicker!

28.5K

786

15

1 month ago

1:31

Almost done the year down phase and then we can start upgrading and re building!

20.3K

739

27

1 month ago

0:52

Took a quick break from work to play in the bit of snow winter finally sent us!

7K

387

11

1 month ago

2:52

Gladiator 2 build starts now! Getting all the pieces off that we will be upgrading!

20.3K

837

28

1 month ago

0:34

Quick trip down the @Toolgrid walls to gather what we need to tear down the Jeep 👍

28.5K

612

12

1 month ago

2:58

Getting the @ArtecIndustries full belly pan installed on the Gladiator

30.9K

1K

26

1 month ago

1:38

Hooked onto the @southlandtrailers tilt deck to go pick up a bunch part for the next Jeep build 👍

16.6K

634

8

1 month ago

1:12

Putting a round over on some of the table components with the @festool-canada MFK 700 edge router

35.5K

1.2K

7

1 month ago

2:56

Upgrading from the stock bumper to a high clearance @A@ArtecIndustriesantam bumper

32K

1.2K

26

1 month ago

2:46

Getting the @F@FELDERGROUPTV945S unboxed and ready for the tech to come set up and tune 👍

252K

3.4K

110

1 month ago

0:27

Swapping out the SCM slide saw and upgrading to the @F@FELDERGROUPTV945S!

11.4K

386

28

1 month ago

The Dusty Lumber Co

The Dusty Lumber Co

Fun morning wheeling with the @RockJock4x4byJohnCurrie and @CurrieEnt crews

First time really testing out the @nacho_offroadlighting for night wheeling! @northridgenation

Putting the @ArtecIndustries armour to the test! Bumpers and skid plates doing their jobs perfectly!

Day 1 giving JT1 a good shakedown testing for clearance, armour strength and smile generation

Before hitting the first trail we set up the @apexdesignsusa 4 tire inflate/deflate system

Made it to Moab for the first time at ESJ! Getting unloaded off the @s@southlandtrailersnd ready!

Had an extra spot on the @southlandtrailers so took one of the @northridgenation Jeeps as well 👍

If you tow trailers it’s definitely worth checking out the @TimbrenIndustries kits

Last step at @northridgenation before we load up and head out is to get all the stickers on!

Next step at @northridgenation is to install the @RCVUltimateAxles RCV’s on the front!

First step in the axle rebuild at @northridgenation is new @revolutiongearaxle components

Drove to @northridgenation to get the gears and axle shafts upgraded. First step tear down!

First stop after a 14 hr drive is @northridgenation for some upgrades before Moab!

Hooked onto the @southlandtrailers gooseneck, loaded up the JT and headed out!

Loading up the ​@Decked with supplies before heading out to Washington and then Moab!

Fun new project just showed up from @DemonPowersports @segwaypowersportscan​

Getting the @Decked drawer system installed on JT1 before heading to Easter Jeep Safari

Whether it’s woodwork or metalwork work, getting things lined up and fitting right is rewarding

Getting the table skirt and legs glued together with @Titebond and @BoraTool clamps and sawhorses 👍

Getting the @RockJock4x4byJohnCurrie Johnny joints in place to measure for control arm lengths

One last test fit before gluing these table base pieces together

Getting the @CurrieEnt axles lifted into place with the @MilwaukeeTool chain hoist

@festool-canada has developed a new version of the DOMINO DF 500 with some great new upgrades!

Getting the aluminum @Motobilt_inc bobbed bed assembled and set in place

Getting the @CurrieEnt Extreme 60 axles out of the crates and rolled into place!

Getting the table skirt and bottom side of the table ready for finish with @festool-canada

Time to glue up the all the table base pieces with @T@Titebond dark and @Bor@BoraToolmps!

Getting the @Motobilt_inc back half kit set up and welded in place

Getting the table base foot pads glued up with @Titebonddark and clamped with @BoraTool clamps

Getting @Motobilt_inc bobbed JT bed all painted and ready to go! @dickindustriesinc

Getting the @Motobilt_inc back half kit set in place for a test fit 👍

Hooked on to the @southlandtrailers tilt deck to haul my wifes SUV to the dealership for diagnosing

Fun 3D @WoodTrick puzzle build with my two youngest kids 👍

These new @festool-canada Granat PROfile pads are amazing! Getting the table base pieces sanded 👍

Building a timber frame workbench

Getting the final pieces cut off the Gladiator and now we can start the building phase!

Double checking cut before cutting off the rear but @dickindustriesinc cut lines are dead on!

Bob Hamilton and his cool old Willys came to pick up Jeep parts to put on the Willys!

Untitled video

Picked up a @hypertherm plasma cutter from @bluecollarsuperstore 👍 Much quicker!

Almost done the year down phase and then we can start upgrading and re building!

Took a quick break from work to play in the bit of snow winter finally sent us!

Gladiator 2 build starts now! Getting all the pieces off that we will be upgrading!

Quick trip down the @Toolgrid walls to gather what we need to tear down the Jeep 👍

Getting the @ArtecIndustries full belly pan installed on the Gladiator

Hooked onto the @southlandtrailers tilt deck to go pick up a bunch part for the next Jeep build 👍

Putting a round over on some of the table components with the @festool-canada MFK 700 edge router

Upgrading from the stock bumper to a high clearance @A@ArtecIndustriesantam bumper

Getting the @F@FELDERGROUPTV945S unboxed and ready for the tech to come set up and tune 👍

Swapping out the SCM slide saw and upgrading to the @F@FELDERGROUPTV945S!

Fun morning wheeling with the @RockJock4x4byJohnCurrie and @CurrieEnt crews

First time really testing out the @nacho_offroadlighting for night wheeling! @northridgenation

Putting the @ArtecIndustries armour to the test! Bumpers and skid plates doing their jobs perfectly!

Day 1 giving JT1 a good shakedown testing for clearance, armour strength and smile generation

Before hitting the first trail we set up the @apexdesignsusa 4 tire inflate/deflate system

Made it to Moab for the first time at ESJ! Getting unloaded off the @s@southlandtrailersnd ready!

Had an extra spot on the @southlandtrailers so took one of the @northridgenation Jeeps as well 👍

If you tow trailers it’s definitely worth checking out the @TimbrenIndustries kits

Last step at @northridgenation before we load up and head out is to get all the stickers on!

Next step at @northridgenation is to install the @RCVUltimateAxles RCV’s on the front!

First step in the axle rebuild at @northridgenation is new @revolutiongearaxle components

Drove to @northridgenation to get the gears and axle shafts upgraded. First step tear down!

First stop after a 14 hr drive is @northridgenation for some upgrades before Moab!

Hooked onto the @southlandtrailers gooseneck, loaded up the JT and headed out!

Loading up the ​@Decked with supplies before heading out to Washington and then Moab!

Fun new project just showed up from @DemonPowersports @segwaypowersportscan​

Getting the @Decked drawer system installed on JT1 before heading to Easter Jeep Safari

Whether it’s woodwork or metalwork work, getting things lined up and fitting right is rewarding

Getting the table skirt and legs glued together with @Titebond and @BoraTool clamps and sawhorses 👍

Getting the @RockJock4x4byJohnCurrie Johnny joints in place to measure for control arm lengths

One last test fit before gluing these table base pieces together

Getting the @CurrieEnt axles lifted into place with the @MilwaukeeTool chain hoist

@festool-canada has developed a new version of the DOMINO DF 500 with some great new upgrades!

Getting the aluminum @Motobilt_inc bobbed bed assembled and set in place

Getting the @CurrieEnt Extreme 60 axles out of the crates and rolled into place!

Getting the table skirt and bottom side of the table ready for finish with @festool-canada

Time to glue up the all the table base pieces with @T@Titebond dark and @Bor@BoraToolmps!

Getting the @Motobilt_inc back half kit set up and welded in place

Loading up the @Decked with supplies before heading out to Washington and then Moab!

Fun new project just showed up from @DemonPowersports @segwaypowersportscan

Loading up the @Decked with supplies before heading out to Washington and then Moab!

Fun new project just showed up from @DemonPowersports @segwaypowersportscan