Larson Electronics Product Testing

1-Phase Buck/Boost Step-Up Prewired Transformer - 208V Primary - 230V Secondary - 30 Amps - 50/60Hz

1-Phase Buck/Boost Step-Up Prewired Transformer - 208V Primary - 230V Secondary - 30 Amps - 50/60Hz https://www.larsonelectronics.com/product/236823/1-phase-buck-boost-step-up-prewired-transformer-208v-primary-230v-secondary-30-amps-50-60hz?productIdBase64=MjM2ODIz0&rank=5 Transformer Features: The MPD-MT-BBT-208V-230V-30A-2X2FT-6.30 buck and boost transformer is a single phase unit with a 6.9 kVA rating and a primary voltage of 208 V AC using a maximum of 33.17 amps on the primary side. This step-up transformer has a secondary voltage of 230 V AC and provides up to 30 amps available on the secondary side. Featuring robust construction, this unit's cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The NEMA 3R painted steel enclosure makes the unit suitable for both indoor and outdoor applications, and this step-up transformer can be either floor or wall mounted. The MPD-MT-BBT-208V-230V-30A-2X2FT-6.30 features a 130°C insulation with a 80°C temperature rise. Construction: The aluminum winding in the MPD-MT-BBT-208V-230V-30A-2X2FT-6.30 are formed from high quality aluminum wire help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. Buck and boost transformers are designed to maximize the performance and life of electrical equipment. The MPD-MT-BBT-208V-230V-30A-2X2FT-6.30 is encapsulated in silica sand and resin, and cased in a NEMA 3R steel enclosure. NEMA 4, NEMA 4X, and NEMA 12 enclosures are available upon request. Benefits: The MPD-MT-BBT-208V-230V-30A-2X2FT-6.30 buck/boost step-up transformer offers many benefits to the consumer. Buck/boost transformers pass the majority of the load voltage directly through the transformer, only transforming a small percentage of the load. Due to this technology, a smaller and quieter step-up transformer is manufactured and uses less materials. This provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Installation and maintenance costs are reduced due to the smaller form factor, and less overall space requirements are decreased. In addition, these step-up transformers operate quieter than a standard autotransformer of the same capacity. Mounting: Integrated wall mounting brackets make installation fast and easy. Because of the smaller overall footprint, heavy machinery is rarely needed for mounting and installation. Wiring/Installation: The MPD-MT-BBT-208V-230V-30A-2X2FT-6.30 is equipped with a 2' 8/3 SOOW whip on both the primary and secondary sides. The primary side whip is equipped with a 30 amp 250 V 3 prong straight blade plug and the secondary side whip is equipped with a 30 amp 250 V 3 prong receptacle. This transformer makes installation simple. Operators connect them to the corresponding current. For example, the 208V whip gets connected to 208V current. Applications: Air conditioners, lighting systems, heating elements, motor applications and other applications that that require the ability to power loads that differ from the available line voltage. Limitations: While there are many benefits to a buck/boost transformer, there are some limitations to consider. This transformer will only transformer voltage, it will not convert phases, it will not create even legs between line 1 and line 2 (L1 and L2 WILL be UNEVEN), has no circuit isolation, and does not create a neutral for applications where a neutral is not already present. If any of these limitations apply to you, you will need a standard transformer. Please see below link for our standard line of industrial transformers or our line of phase converters. Note on Phases: This buck/boost transformer is a single phase step-up transformers. For three phase transformers, click on the following links: Three Phase Delta Buck/Boost Transformers Three Phase Wye Buck/Boost Transformers Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-240-2508 or [email protected] to discuss your specific requirements.